Bar Joist Attachment
Standard electro-galvanized finish provides superior corrosion protection. Hot-dipped galvanized finish is also available as special order. Can be installed on bar joists or I-beams.
Step 1: Pull back thumb spring and select spot on bar joist to mount adaptor.
Step 2: Release thumb spring, allowing it to grip bar joist. Finger tighten the bolts to keep adaptor fi rmly in place.
Step 3: Tighten bolts until bolt heads shear off.
• Material : Steel
• Coating : Zinc Plated
• Approval : UL Listed and FM Approved
• Use for both lateral and longitudinal sway brace applications
• Can be installed on bar joists or I-beams
• Thumb spring retainer allows for ease of positioning
• Snap-off bolt head helps enable easy installation and inspection of sway braces
• No assembly required, no loose parts
• Meets NFPA®-13 requirements for sway bracing
| Kod Code |
Flanş Kalınlığı Flange (FT) |
Vida Çapı Screw Size (Sc) |
A (mm) | B (mm) | C (mm) | ||||||||||
| 3100404354 | 6,4 – 12,7 mm | 1/2" | 50,8 | 76,2 | 63,5 | ||||||||||
UL Load:
| Yapıya Göre Askının Yönü Brace Type |
Bağlantı Borusu Service Pipe Size |
Dayanım Rating |
|||||||||||||
| Paralel / Parallel | 25 mm - 250 mm | 13.340 N | |||||||||||||
| Dikey / Perpendicular | 25 mm - 300 mm | 16.630 N | |||||||||||||
FM Load:
| Askılama Yönü Brace Type |
Dikey Kurulum Açısı Başına Yatay Kapasite / Horizontal Capacity per Installation Angle From Vertical 30° - 44° 45° - 59° 60° - 74° 75° - 90° |
||||||||||||||
| Paralel / Parallel | 6.270 N | 9.385 N | 11.300 N | 12.590 N | |||||||||||
| Dikey / Perpendicular | 7.740 N | 7.605 N | 9.165 N | 10.230 N | |||||||||||
